Issues

• Gentoo bug: ModuleNotFoundError: No module named 'linuxcnc'

  LinuxCNC/linuxcnc#4717 · Filter by author NTULINUX opened on Oct 24, 2026

• RESET STATE IF NOT USE IN REMAP

  LinuxCNC/linuxcnc#4715 · Filter by author soundlike opened on Oct 24, 2026

• [minor] hacompile doc, periodic off by one on pin ranges

  LinuxCNC/linuxcnc#4714 · Filter by author dirkx opened on Oct 23, 2026
  1

• [minor] ABORT, TRACE in gcode not documented

  LinuxCNC/linuxcnc#4713 · Filter by author dirkx opened on Oct 23, 2026
  1

• or32 - multi input or

  LinuxCNC/linuxcnc#4712 · Filter by author dirkx opened on Oct 23, 2026
  3

• halcomponent - unconnected signal not showing default value

  LinuxCNC/linuxcnc#4711 · Filter by author dirkx opened on Oct 23, 2026
  3

• Compilation error with Clang 23+libcxx

  LinuxCNC/linuxcnc#4710 · Filter by author NTULINUX opened on Oct 23, 2026
  2

• minor feature - add an explicit reset to the timer

  LinuxCNC/linuxcnc#4709 · Filter by author dirkx opened on Oct 22, 2026

• runtests: Tests can pass while rtapi_app crashes

  LinuxCNC/linuxcnc#4707 · Filter by author hdiethelm opened on Oct 21, 2026
  1

• sim_pin broken with new hal names

  2.10-must-fix
  LinuxCNC/linuxcnc#4698 · Filter by author rene-dev opened on Oct 17, 2026

• First 'set' from postgui.hal of an halui value does not propagate in AXIS

  LinuxCNC/linuxcnc#4690 · Filter by author code-makerspaceleiden-nl-sync-account opened on Oct 16, 2026

• Newline missing in some log messages

  LinuxCNC/linuxcnc#4689 · Filter by author hdiethelm opened on Oct 15, 2026
  2

• QtVCP: Spindle decrease can increase speed near the configured minimum

  LinuxCNC/linuxcnc#4688 · Filter by author Martin-HC opened on Oct 15, 2026
  1

  

• Flaky tests when CPU is busy

  LinuxCNC/linuxcnc#4669 · Filter by author hdiethelm opened on Oct 11, 2026
  24

• We need a tool table API

  2.10-must-fix
  LinuxCNC/linuxcnc#4668 · Filter by author grandixximo opened on Oct 11, 2026
  

• command (EMC_JOG_STOP) cannot be executed until the machine is out of E-stop and turned on - affects selecting gmoccapy jog increment input at config startup

  affects gmoccapy
  LinuxCNC/linuxcnc#4655 · Filter by author DauntlessAq opened on Oct 8, 2026

• [minor] Some extra documentation on run in place

  LinuxCNC/linuxcnc#4652 · Filter by author dirkx opened on Oct 7, 2026
  3

• [minor] dot (graphviz) & inkscape are needed for a make docs -- but are not checked by configure

  LinuxCNC/linuxcnc#4651 · Filter by author dirkx opened on Oct 7, 2026
  1

• hal - alphanumeric sort

  LinuxCNC/linuxcnc#4650 · Filter by author dirkx opened on Oct 7, 2026
  3

• whb04b4 (not -6) chokes on assert()

  LinuxCNC/linuxcnc#4646 · Filter by author dirkx opened on Oct 6, 2026

• Feature request: (Not)Accepting decoration as a hal signal name when there is no space

  LinuxCNC/linuxcnc#4645 · Filter by author dirkx opened on Oct 6, 2026
  7

• Running parallel instances using namespaces

  LinuxCNC/linuxcnc#4588 · Filter by author BsAtHome opened on Sep 27, 2026
  15

• SIM: negative spindle speed with simulated encoder

  hal component
  Bug

  LinuxCNC/linuxcnc#4582 · Filter by author rmu75 opened on Sep 24, 2026
  3

• CI build artifacts on master have wrong version

  LinuxCNC/linuxcnc#4555 · Filter by author BsAtHome opened on Sep 16, 2026
  9

• whb.axis.X.jog-counts increments but axis does not move (Teleop mode, LinuxCNC 2.9.10)

  LinuxCNC/linuxcnc#4542 · Filter by author rimoneeng-creator opened on Sep 14, 2026
  2