chore(deps): bump the uv group across 1 directory with 5 updates by dependabot[bot] · Pull Request #95 · TeaEntityLab/teaAgent

dependabot · 2026-10-23T17:07:39Z

Bumps the uv group with 5 updates in the / directory:

Package	From	To
certifi	`2026.5.20`	`2026.10.19`
pip	`26.1.2`	`26.2`
pyjwt	`2.13.0`	`2.15.0`
urllib3	`2.7.0`	`2.8.0`
virtualenv	`21.4.1`	`21.14.9`

Updates certifi from 2026.5.20 to 2026.10.19

Commits

662df63 Restore unaffected emSign roots (#439) (#440)
5cb238c Remove emsign (#437)
69494a7 Bump actions/download-artifact from 8.0.1 to 8.0.2 (#436)
029c7b0 Bump actions/upload-artifact from 7.0.1 to 7.0.2 (#435)
9d0a8f1 Add support for Python 3.15 (#432)
db472ab Bump pypa/gh-action-pypi-publish from 1.14.1 to 1.14.2 (#431)
f4bc676 2026.07.22 (#428)
4c91f9c Bump actions/setup-python from 6.3.0 to 7.0.0 (#427)
01a66c5 Bump actions/checkout from 7.0.0 to 7.0.1 (#426)
eb355f4 Bump pypa/gh-action-pypi-publish from 1.14.0 to 1.14.1 (#425)
Additional commits viewable in compare view

Updates pip from 26.1.2 to 26.2

Changelog

Sourced from pip's changelog.

26.2 (2026-07-29)

Deprecations and Removals

Newly published packages will no longer be immediately visible to pip if the index uses caching. To install a newly published package, use --refresh-package. ([#13680](https://github.com/pypa/pip/issues/13680) <https://github.com/pypa/pip/issues/13680>_)

Drop support for detecting legacy, non-:pep:405, virtualenv (< 20) environments. ([#14062](https://github.com/pypa/pip/issues/14062) <https://github.com/pypa/pip/issues/14062>_)

Constraints files, including PIP_CONSTRAINT, no longer affect isolated build environments. Use --build-constraint or the PIP_BUILD_CONSTRAINT environment variable to constrain build dependencies instead.

The --use-feature=build-constraint flag is now always enabled and has no effect. ([#14094](https://github.com/pypa/pip/issues/14094) <https://github.com/pypa/pip/issues/14094>_)

Features

Declare support for Python 3.15 ([#14208](https://github.com/pypa/pip/issues/14208) <https://github.com/pypa/pip/issues/14208>_)

Support self-referential extras officially. pip has supported this by accident since version 21.2. ([#11296](https://github.com/pypa/pip/issues/11296) <https://github.com/pypa/pip/issues/11296>_)

Add --only-deps flag to instruct pip to select only the dependencies of supplied packages. It cannot be used with --no-deps, -r, --group, or --requirements-from-script. ([#11440](https://github.com/pypa/pip/issues/11440) <https://github.com/pypa/pip/issues/11440>_)

Cache simple responses in accordance to their Cache-Control header instead of always revalidating on every request. To refresh cached package index responses and ensure newly published packages are found, use --refresh-package <package>. ([#13680](https://github.com/pypa/pip/issues/13680) <https://github.com/pypa/pip/issues/13680>_)

Add --no-require-hashes to disable automatic enablement of --require-hashes when encountering a requirement with hashes. ([#14169](https://github.com/pypa/pip/issues/14169) <https://github.com/pypa/pip/issues/14169>_)

Honor --only-final when sourcing requirements with -r pylock.toml. ([#13950](https://github.com/pypa/pip/issues/13950) <https://github.com/pypa/pip/issues/13950>_)

Add support for pylock.toml upload-time field, so --uploaded-prior-to works with -r pylock.toml. ([#14168](https://github.com/pypa/pip/issues/14168) <https://github.com/pypa/pip/issues/14168>_)

Better error messages in case of conflicts with requirements from -r pylock.toml. ([#13963](https://github.com/pypa/pip/issues/13963) <https://github.com/pypa/pip/issues/13963>_)

Add experimental support for isolating build subprocesses by creating standard virtual environments. This will fix most (if not all) subtle isolation issues that can lead to broken builds exclusive to pip. The feature can be enabled via --use-feature=venv-isolation and will be enabled by default in a future release.

Note that the feature has limited compatibility with --use-feature=inprocess-build-deps. While most builds should work with both features enabled, there are known edge cases. inprocess-build-deps will not be enabled by default until they are fixed. ([#14070](https://github.com/pypa/pip/issues/14070) <https://github.com/pypa/pip/issues/14070>_)

Present more informative diagnostic errors on uncaught network errors. ([#14115](https://github.com/pypa/pip/issues/14115) <https://github.com/pypa/pip/issues/14115>_)

Allow opting out of Git partial clones with PIP_NO_PARTIAL_CLONE_FOR_BROKEN_GIT_SERVER. ([#11043](https://github.com/pypa/pip/issues/11043) <https://github.com/pypa/pip/issues/11043>_)

Add a --no-proxy-env (or --proxy "") option to ignore proxies configured via non-pip environment variables or configuration files. A proxy set with --proxy is still used. ([#5378](https://github.com/pypa/pip/issues/5378) <https://github.com/pypa/pip/issues/5378>_)

Add support for pulling username from keyring subprocess provider ([#12543](https://github.com/pypa/pip/issues/12543) <https://github.com/pypa/pip/issues/12543>_)

Speedup tab autocompletion by lazy-importing certain modules. ([#4768](https://github.com/pypa/pip/issues/4768) <https://github.com/pypa/pip/issues/4768>_)

... (truncated)

Commits

4b6ae5c Bump for release
50b6d3c Update AUTHORS.txt
dbddfbd Tweak news entries for pip 26.2 (#14212)
6576b75 Merge pull request #14165 from sbidoul/refactor-pylock-hanling-sbi
0090e00 Address a variety of typos detected in code review
e12ddd9 Add support for --uploaded-prior-to with -r pylock.toml
5eefdbc Better conflict report for requirements from -r pylock.toml
6d71ff8 Test --only-final with -r pylock.toml
e7d6eb9 Refactor -r pylock.toml
756506d Add TODO about pylock.select and --no-binary
Additional commits viewable in compare view

Updates pyjwt from 2.13.0 to 2.15.0

Release notes

Sourced from pyjwt's releases.

2.15.0

See the 2.15.0 changelog for complete release details.

2.14.0

See the 2.14.0 changelog for the complete release details and related security advisories.

Changelog

Sourced from pyjwt's changelog.

`v2.15.0 <https://github.com/jpadilla/pyjwt/compare/2.14.0...2.15.0>`__

Security


- Wrap recursion errors from deeply nested JWT payloads in ``DecodeError``
  instead of exposing a raw ``RecursionError``.
Added

- Support Python 3.15 by @kytta in `[#1202](https://github.com/jpadilla/pyjwt/issues/1202) &lt;https://github.com/jpadilla/pyjwt/pull/1202&gt;`__
Changed



JWKSetCache now stores the parsed PyJWKSet rather than the raw JWKS
payload, so a cache hit no longer re-parses every key. JWKSetCache.put()
accepts either form and raises PyJWKSetError for anything else. As a
result, PyJWKClient.get_jwk_set() returns the same PyJWKSet instance
for as long as it stays cached, rather than a freshly built one per call in
[#1208](https://github.com/jpadilla/pyjwt/issues/1208) &lt;https://github.com/jpadilla/pyjwt/pull/1208&gt;__
PyJWKClient.fetch_data() now raises
PyJWKClientError(&quot;The JWKS endpoint did not return a JSON object&quot;) when
the endpoint response is not a JSON object, instead of returning it for
get_jwk_set() to reject. Callers reaching the JWKS through
get_jwk_set() see the same error as before in
[#1208](https://github.com/jpadilla/pyjwt/issues/1208) &lt;https://github.com/jpadilla/pyjwt/pull/1208&gt;__

Fixed

- Return cached ``PyJWKSet`` values from ``PyJWKClient.get_jwk_set()`` instead
  of raising ``PyJWKClientError(&quot;The JWKS endpoint did not return a JSON
  object&quot;)``. ``JWKSetCache.put()`` documents ``PyJWKSet`` as the cached value,
  so callers pre-populating the cache to avoid a network round-trip could not
  read it back in `[#914](https://github.com/jpadilla/pyjwt/issues/914) &lt;https://github.com/jpadilla/pyjwt/issues/914&gt;`__ and
  `[#1208](https://github.com/jpadilla/pyjwt/issues/1208) &lt;https://github.com/jpadilla/pyjwt/pull/1208&gt;`__
- ``PyJWKClient.get_jwk_set()`` now caches the key set it returns, so a
  ``fetch_data()`` override that filters or transforms the JWKS is no longer
  undone by the next cache hit in
  `[#1208](https://github.com/jpadilla/pyjwt/issues/1208) &lt;https://github.com/jpadilla/pyjwt/pull/1208&gt;`__
- Raise the documented ``PyJWTError`` subclass instead of leaking a
  ``TypeError`` when the ``exp``, ``nbf``, or ``iat`` claim decodes to a
  non-numeric, non-string value such as a list, dict, or ``null``.
- Reject OKP JWK private keys when their public ``x`` component does not
  match the private ``d`` component.
- Treat malformed JWK Set members as unusable keys rather than letting
  ``AttributeError`` or ``TypeError`` escape ``PyJWKSet``. A member that is not
&lt;/tr&gt;&lt;/table&gt; 
</code></pre>
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>

<li><a href="https://github.com/jpadilla/pyjwt/commit/1d41a6478e1562e68ff667fcd703356acf085f68&quot;&gt;&lt;code&gt;1d41a64&lt;/code&gt;&lt;/a> chore: prepare 2.15.0 release</li>

<li><a href="https://github.com/jpadilla/pyjwt/commit/9bc06658f875b9b40091539140bbbdc4639161c3&quot;&gt;&lt;code&gt;9bc0665&lt;/code&gt;&lt;/a> fix: make recursive payload tests deterministic</li>

<li><a href="https://github.com/jpadilla/pyjwt/commit/5fde08a6cf906aa7698de2d6391d88b73006b17b&quot;&gt;&lt;code&gt;5fde08a&lt;/code&gt;&lt;/a> fix: normalize recursive JWT payload errors</li>

<li><a href="https://github.com/jpadilla/pyjwt/commit/171062d2d734315272a901100aa4b109f2fc3c19&quot;&gt;&lt;code&gt;171062d&lt;/code&gt;&lt;/a> utils: mention bytes in force_bytes type error (<a href="https://redirect.github.com/jpadilla/pyjwt/issues/1173&quot;&gt;#1173&lt;/a&gt;)&lt;/li>

<li><a href="https://github.com/jpadilla/pyjwt/commit/c9d4d5375bf464ef363506fed9eb6e7f33217ab6&quot;&gt;&lt;code&gt;c9d4d53&lt;/code&gt;&lt;/a> docs/conf: drop duplicate 'and' from read() docstring (<a href="https://redirect.github.com/jpadilla/pyjwt/issues/1174&quot;&gt;#1174&lt;/a&gt;)&lt;/li>

<li><a href="https://github.com/jpadilla/pyjwt/commit/2763752196113e1473b0ed7905aa6034aedfbe53&quot;&gt;&lt;code&gt;2763752&lt;/code&gt;&lt;/a> Add support for Python 3.15 (<a href="https://redirect.github.com/jpadilla/pyjwt/issues/1202&quot;&gt;#1202&lt;/a&gt;)&lt;/li>

<li><a href="https://github.com/jpadilla/pyjwt/commit/4adcd02722f5011c60079d3978dfc167b9a8eaa5&quot;&gt;&lt;code&gt;4adcd02&lt;/code&gt;&lt;/a> Catch http.client.HTTPException in PyJWKClient.fetch_data (<a href="https://redirect.github.com/jpadilla/pyjwt/issues/1201&quot;&gt;#1201&lt;/a&gt;)&lt;/li>

<li><a href="https://github.com/jpadilla/pyjwt/commit/9e501d993b4d3e7dba14bdb1722b1d993ac75097&quot;&gt;&lt;code&gt;9e501d9&lt;/code&gt;&lt;/a> fix: correct docstring typo in _validate_jti (<a href="https://redirect.github.com/jpadilla/pyjwt/issues/1179&quot;&gt;#1179&lt;/a&gt;)&lt;/li>

<li><a href="https://github.com/jpadilla/pyjwt/commit/4047c44d51950ffda15f40054508d3f17c43b1e2&quot;&gt;&lt;code&gt;4047c44&lt;/code&gt;&lt;/a> docs: clarify JWK certificate member handling (<a href="https://redirect.github.com/jpadilla/pyjwt/issues/1212&quot;&gt;#1212&lt;/a&gt;)&lt;/li>

<li><a href="https://github.com/jpadilla/pyjwt/commit/f4e2b59f543cc82d46d9d69922bba59e804216b9&quot;&gt;&lt;code&gt;f4e2b59&lt;/code&gt;&lt;/a> [pre-commit.ci] pre-commit autoupdate (<a href="https://redirect.github.com/jpadilla/pyjwt/issues/1210&quot;&gt;#1210&lt;/a&gt;)&lt;/li>

<li>Additional commits viewable in <a href="https://github.com/jpadilla/pyjwt/compare/2.13.0...2.15.0&quot;&gt;compare view</a></li>

</ul>

</details>
<br />

Updates urllib3 from 2.7.0 to 2.8.0

Release notes
Sourced from urllib3's releases.

2.8.0
🚀 urllib3 is fundraising for HTTP/2 support
urllib3 is raising ~$40,000 USD to release HTTP/2 support and ensure long-term sustainable maintenance of the project. If your company or organization uses Python and would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and thousands of other projects please consider contributing financially to ensure HTTP/2 support is developed sustainably and maintained for the long-haul.
Thank you for your support.
Security
Fixed the following security issues:

The TLS configuration for HTTPS proxies could be ignored or overridden. (High severity, GHSA-8988-9cw3-xx77)
HTTPResponse.stream() and read_chunked() could buffer a chunk-size line of unbounded length in memory. (High severity, GHSA-vxq7-64xx-v4gw)
Chunked Deflate streaming could enter an infinite loop. (Medium severity, GHSA-gh4c-6fx4-qh6g)


[!IMPORTANT]
urllib3 2.8.0 fixes HTTPS proxy TLS configuration being ignored or overridden by destination settings. Configurations relying on that behavior may require changes.
Configure proxy CA certificates and client certificates in proxy_ssl_context, and proxy identity checks with proxy_assert_hostname or proxy_assert_fingerprint. Destination client certificates and identity overrides no longer apply to HTTPS forwarding proxy connections.


[!NOTE]
CVE IDs had not yet been assigned to these advisories at the time of release due to a backlog at GitHub's CNA.

Deprecations & Removals

Deprecated using an empty collection as the Retry option allowed_methods to retry any verb. (#5044)

Features

Added Url.auth_decoded and Url.auth_decoded_joined convenience properties to the result of parse_url(). (#4945)
Added basic_auth_encoding and proxy_basic_auth_encoding parameters to urllib3.util.make_headers(). (#5092)

Bugfixes


Fixed response header handling to replace obsolete folded header lines (obs-fold) with spaces in accordance with RFC 9112, preventing raw CRLF sequences from appearing in header values such as Set-Cookie. (#1362)


Fixed usage of proxy_ssl_context with ProxyManager when use_forwarding_for_https=True. Passing ssl_context instead of proxy_ssl_context for HTTPS proxies in this configuration now emits a FutureWarning and will raise an error in v3.0. (#2577)


Changed behavior of the default ConnectionPool.pool initialization. LifoQueue is now resolved from the queue module after the ConnectionPool is instantiated instead of using the default cached QueueCls class property. This is done because sometimes the queue.LifoQueue is monkey-patched late in the program, such as by gevent. (#3289)


Raised UnrewindableBodyError instead of ValueError when retrying a request whose body had tell() but not seek(). (#3779)


Decoded percent-encoded SOCKS proxy credentials before authenticating with the proxy server. (#3785)


Fixed HTTPResponse.drain_conn() to discard unread response data in 64 KiB chunks (same as the default amt when doing HTTPResponse.stream(...)). (#5019)


Fixed is_ipaddress() to detect non-standard IPv4 forms accepted by socket.connect, such as hex (0x7f000001), octal (0177.0.0.1), and decimal integers (2130706433), ensuring SSL certificate verification uses the correct mode for these addresses. (#5029)


Fixed HTTPConnectionPool.urlopen raising a misleading FullPoolError instead of ValueError when called with an invalid timeout argument on a pool created with block=True. (#5059)


Fixed port-zero handling to preserve explicit :0 values instead of substituting the default ports 80 or 443 in URL parsing, pool selection, proxy configuration, connection_from_url(), and HTTP/2 request authority. (#5071, #5101)


Fixed a bug where PoolManager passed the assert_hostname and assert_fingerprint parameters to HTTP connection pools. (#5077)


Fixed HTTPConnectionPool.urlopen() and HTTP proxy forwarding to strip URL fragments from absolute request targets before sending requests. (#5079)


Added safeguards to the proxy tunneling code to prevent potential security issues when handling invalid characters in the proxy host and HTTP headers. This change affects users of Python 3.10, Python 3.11, and Python 3.12 when the standard library does not contain the fix; those on newer Python versions should upgrade to 3.13.14+ or 3.14.5+ to get the same security fixes. (#5091)


Fixed HTTPSConnection.connect() overriding ProxyConfig.ssl_context's certificate policy and proxy identity checks with the target connection's TLS settings when forwarding through an HTTPS proxy.
HTTPSConnection no longer applies target SNI, assertions, or client credentials to forwarding proxy handshakes and continues to use its ssl_context as a fallback when an HTTPS proxy forwards an HTTP target. (#5093)


Fixed URL parsing to more strictly enforce RFC 3986 host syntax, rejecting invalid host input such as raw spaces and control characters, malformed percent-encodings, and percent-encoded control characters in HTTP(S) hosts and IPv6 zone identifiers, including proxy CONNECT tunnel targets. Host normalization now also follows RFC 3986 normalization rules for percent-encoded octets by decoding percent-encoded unreserved characters and uppercasing the hexadecimal digits of retained percent-encoded octets. (#5095)




... (truncated)


Changelog
Sourced from urllib3's changelog.

2.8.0 (2026-09-15)
Security
Fixed the following security issues:

The TLS configuration for HTTPS proxies could be ignored or overridden.
(High severity, GHSA-8988-9cw3-xx77 <https://github.com/urllib3/urllib3/security/advisories/GHSA-8988-9cw3-xx77>__)
HTTPResponse.stream() and read_chunked() could buffer a chunk-size
line of unbounded length in memory. (High severity,
GHSA-vxq7-64xx-v4gw <https://github.com/urllib3/urllib3/security/advisories/GHSA-vxq7-64xx-v4gw>__)
Chunked Deflate streaming could enter an infinite loop. (Medium severity,
GHSA-gh4c-6fx4-qh6g <https://github.com/urllib3/urllib3/security/advisories/GHSA-gh4c-6fx4-qh6g>__)

.. caution::
urllib3 2.8.0 fixes HTTPS proxy TLS configuration being ignored or
overridden by destination settings. Configurations relying on that
behavior may require changes.
Configure proxy CA certificates and client certificates in
proxy_ssl_context, and proxy identity checks with
proxy_assert_hostname or proxy_assert_fingerprint.
Destination client certificates and identity overrides no longer
apply to HTTPS forwarding proxy connections.

Deprecations & Removals

Deprecated using an empty collection as the Retry option
allowed_methods to retry any verb.
([#5044](https://github.com/urllib3/urllib3/issues/5044) <https://github.com/urllib3/urllib3/issues/5044>__)

Features

Added Url.auth_decoded and Url.auth_decoded_joined convenience
properties to the result of parse_url().
([#4945](https://github.com/urllib3/urllib3/issues/4945) <https://github.com/urllib3/urllib3/issues/4945>__)
Added basic_auth_encoding and proxy_basic_auth_encoding parameters to
urllib3.util.make_headers().
([#5092](https://github.com/urllib3/urllib3/issues/5092) <https://github.com/urllib3/urllib3/issues/5092>__)

Bugfixes


... (truncated)


Commits

b1d30ab Release 2.8.0
9016d7e Skip test_read_chunked_with_trailing_data_does_not_hang for brotlicffi (#5258)
9101f58 Fix nox -s docs warning (#5256)
cd770b0 Merge commit from fork
ea2ad7b Merge commit from fork
0716e31 Fix loading unencrypted client keys with a password in pyOpenSSL (#5255)
43c68c8 Test pickling of InvalidChunkLength (#5247)
308b279 Share security policy between GitHub and Read the Docs (#5253)
53fa073 Add policy on duplicate pull requests (#5252)
5f2a6a8 Assert on the ALPN extension in test_tunnel_sets_http_11_alpn (#5232)
Additional commits viewable in compare view




Updates virtualenv from 21.4.1 to 21.14.9

Release notes
Sourced from virtualenv's releases.

21.14.9
Bugfixes - 21.14.9


Parse VIRTUALENV_PERIODIC_UPDATE_INSECURE as a boolean, so 0, false, no and off keep certificate
verification enabled. (#3398)


Reject destinations whose resolved path contains the platform's PATH separator, including separators inherited from
the working directory or a directory symlink. (#3399)


Preserve an existing pyvenv.cfg when a prompt or configuration value cannot be encoded as UTF-8, instead of
leaving the file empty after a failed environment creation. The file now ends its lines with LF on every platform.
Debug logs show each configuration line as a Python string literal, so control characters are visible. (#3400)


Skip writing a .venv redirect when the environment name contains a line boundary. The environment is still
created, and any existing redirect remains unchanged. (#3401)


Preserve non-ASCII values in activate_this.py when applications read the script with a legacy text encoding before
executing it. (#3402)


Reject malformed seed versions and requirements ending in archive suffixes before starting pip, with an error
identifying the invalid value instead of a misleading download or local-file error. (#3403)


Allow a literal percent sign as a csh prompt and preserve carets in tcsh prompt display instead of interpreting them
as control-character notation.
Separate csh history and prompt escapes from preceding non-ASCII text in legacy locales. (#3404)


Report an error when an existing pyvenv.cfg is not a regular file, instead of trying to read or write directories,
pipes, or devices as configuration files. (#3405)


Preserve percent-containing paths during batch reactivation and show dollar signs literally in command prompts. Skip
batch scripts for paths containing line boundaries, and remove stale batch scripts for unsupported paths even when
only other activators are selected. (#3406)


Compile shared seed-cache bytecode without loading site customizations from the destination environment or importing
modules from the current working directory. (#3407)


Keep the bundled seed version when a cached periodic update is older, and stop recording downloads below the bundled
version during update checks. (#3408)


Stop activating a moved environment, leaving PATH unchanged, when the shell is not bash, the script is evaluated
or read from standard input, a path tool fails, the sourced file is not the environment's own activation script, or
the new location has no pyvenv.cfg, instead of continuing with an incorrect environment path. (#3409)


Reject built-in options with missing values before creating the application-data directory or starting interpreter
discovery, instead of reporting the argument error after those operations. (#3410)


Keep unset-variable bookkeeping out of exported xonsh variables, so child shells do not restore an internal sentinel
as PYTHONHOME. Skip xonsh activation for destination names that its PATH handling would expand to a different
path.
Restore unset Tcl/Tk library variables when switching between environments in one xonsh session.
Preserve non-ASCII paths and prompts when xonsh reads activation scripts with a legacy encoding. (#3411)


Skip default shell activators with a warning when a POSIX path encoding is incompatible with their UTF-8 scripts.
Explicitly requested incompatible shell activators still report an error. Environments created with --activators=
or --activators=python remain supported in legacy locales. Undecodable parent paths are now caught before any
shell activation script is written. (#3412)




... (truncated)


Changelog
Sourced from virtualenv's changelog.

Bugfixes - 21.14.9


Parse VIRTUALENV_PERIODIC_UPDATE_INSECURE as a boolean, so 0, false, no and off keep certificate
verification enabled. (:issue:3398)


Reject destinations whose resolved path contains the platform's PATH separator, including separators inherited from
the working directory or a directory symlink. (:issue:3399)


Preserve an existing pyvenv.cfg when a prompt or configuration value cannot be encoded as UTF-8, instead of
leaving the file empty after a failed environment creation. The file now ends its lines with LF on every platform.
Debug logs show each configuration line as a Python string literal, so control characters are visible. (:issue:3400)


Skip writing a .venv redirect when the environment name contains a line boundary. The environment is still
created, and any existing redirect remains unchanged. (:issue:3401)


Preserve non-ASCII values in activate_this.py when applications read the script with a legacy text encoding before
executing it. (:issue:3402)


Reject malformed seed versions and requirements ending in archive suffixes before starting pip, with an error
identifying the invalid value instead of a misleading download or local-file error. (:issue:3403)


Allow a literal percent sign as a csh prompt and preserve carets in tcsh prompt display instead of interpreting them
as control-character notation.
Separate csh history and prompt escapes from preceding non-ASCII text in legacy locales. (:issue:3404)


Report an error when an existing pyvenv.cfg is not a regular file, instead of trying to read or write directories,
pipes, or devices as configuration files. (:issue:3405)


Preserve percent-containing paths during batch reactivation and show dollar signs literally in command prompts. Skip
batch scripts for paths containing line boundaries, and remove stale batch scripts for unsupported paths even when
only other activators are selected. (:issue:3406)


Compile shared seed-cache bytecode without loading site customizations from the destination environment or importing
modules from the current working directory. (:issue:3407)


Keep the bundled seed version when a cached periodic update is older, and stop recording downloads below the bundled
version during update checks. (:issue:3408)


Stop activating a moved environment, leaving PATH unchanged, when the shell is not bash, the script is evaluated
or read from standard input, a path tool fails, the sourced file is not the environment's own activation script, or
the new location has no pyvenv.cfg, instead of continuing with an incorrect environment path. (:issue:3409)


Reject built-in options with missing values before creating the application-data directory or starting interpreter
discovery, instead of reporting the argument error after those operations. (:issue:3410)


Keep unset-variable bookkeeping out of exported xonsh variables, so child shells do not restore an internal sentinel
as PYTHONHOME. Skip xonsh activation for destination names that its PATH handling would expand to a different
path.
Restore unset Tcl/Tk library variables when switching between environments in one xonsh session.
Preserve non-ASCII paths and prompts when xonsh reads activation scripts with a legacy encoding. (:issue:3411)


Skip default shell activators with a warning when a POSIX path encoding is incompatible with their UTF-8 scripts.
Explicitly requested incompatible shell activators still report an error. Environments created with --activators=
or --activators=python remain supported in legacy locales. Undecodable parent paths are now caught before any
shell activation script is written. (:issue:3412)


Keep apostrophes and backslashes in fish activation values separate from preceding non-ASCII characters, so fish 3




... (truncated)


Commits

e53e30b release 21.14.9
2519941 🐛 fix(seed): preserve interpreter paths in console scripts (#3417)
70a0102 🐛 fix(seed): preserve shared cache when reseeding with pip (#3423)
554d9f9 🐛 fix(create): replace linked output directories (#3429)
7babec6 🐛 fix(seed): verify wheels before caching (#3430)
2dc8bd8 🐛 fix(subprocess): omit implicit helper import paths (#3416)
d25f286 🐛 fix(create): replace generated file links (#3431)
e3cea6f 🐛 fix(seed): contain metadata cleanup (#3428)
2bfdc02 🐛 fix(path): preserve link targets on delete errors (#3427)
6196d35 🐛 fix(seed): retain the parent installation for updates (#3420)
Additional commits viewable in compare view




Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.


Dependabot commands and options


You can trigger Dependabot actions by commenting on this PR:

@dependabot rebase will rebase this PR
@dependabot recreate will recreate this PR, overwriting any edits that have been made to it
@dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
@dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
@dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
@dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
@dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
@dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions

You can disable automated security fix PRs for this repo from the Security Alerts page.

Bumps the uv group with 5 updates in the / directory: | Package | From | To | | --- | --- | --- | | [certifi](https://github.com/certifi/python-certifi) | `2026.5.20` | `2026.10.19` | | [pip](https://github.com/pypa/pip) | `26.1.2` | `26.2` | | [pyjwt](https://github.com/jpadilla/pyjwt) | `2.13.0` | `2.15.0` | | [urllib3](https://github.com/urllib3/urllib3) | `2.7.0` | `2.8.0` | | [virtualenv](https://github.com/pypa/virtualenv) | `21.4.1` | `21.14.9` | Updates `certifi` from 2026.5.20 to 2026.10.19 - [Commits](certifi/python-certifi@2026.05.20...2026.10.19) Updates `pip` from 26.1.2 to 26.2 - [Changelog](https://github.com/pypa/pip/blob/main/NEWS.rst) - [Commits](pypa/pip@26.1.2...26.2) Updates `pyjwt` from 2.13.0 to 2.15.0 - [Release notes](https://github.com/jpadilla/pyjwt/releases) - [Changelog](https://github.com/jpadilla/pyjwt/blob/master/CHANGELOG.rst) - [Commits](jpadilla/pyjwt@2.13.0...2.15.0) Updates `urllib3` from 2.7.0 to 2.8.0 - [Release notes](https://github.com/urllib3/urllib3/releases) - [Changelog](https://github.com/urllib3/urllib3/blob/main/CHANGES.rst) - [Commits](urllib3/urllib3@2.7.0...2.8.0) Updates `virtualenv` from 21.4.1 to 21.14.9 - [Release notes](https://github.com/pypa/virtualenv/releases) - [Changelog](https://github.com/pypa/virtualenv/blob/main/docs/changelog.rst) - [Commits](pypa/virtualenv@21.4.1...21.14.9) --- updated-dependencies: - dependency-name: certifi dependency-version: 2026.10.19 dependency-type: indirect dependency-group: uv - dependency-name: pip dependency-version: '26.2' dependency-type: indirect dependency-group: uv - dependency-name: pyjwt dependency-version: 2.15.0 dependency-type: indirect dependency-group: uv - dependency-name: urllib3 dependency-version: 2.8.0 dependency-type: indirect dependency-group: uv - dependency-name: virtualenv dependency-version: 21.14.9 dependency-type: indirect dependency-group: uv ... Signed-off-by: dependabot[bot] <support@github.com>

dependabot · 2026-10-23T17:07:43Z

Labels

The following labels could not be found: python. Please create it before Dependabot can add it to a pull request.

Please fix the above issues or remove invalid values from dependabot.yml.

dependabot Bot requested a review from johnteee as a code owner October 23, 2026 17:07

dependabot Bot added the dependencies Pull requests that update a dependency file label Oct 23, 2026

Navigation Menu

Repository navigation

chore(deps): bump the uv group across 1 directory with 5 updates - #95

chore(deps): bump the uv group across 1 directory with 5 updates#95
dependabot[bot] wants to merge 1 commit into
mainfrom
dependabot/uv/uv-e5bcd7c3cf

dependabot Bot commented on behalf of github Oct 23, 2026

2.8.0

🚀 urllib3 is fundraising for HTTP/2 support

Security

Deprecations & Removals

Features

Bugfixes

2.8.0 (2026-09-15)

Security

Deprecations & Removals

Features

Bugfixes

21.14.9

Bugfixes - 21.14.9

Bugfixes - 21.14.9

Uh oh!

dependabot Bot commented on behalf of github Oct 23, 2026

Uh oh!

This branch has not been deployed

Reviewers

Uh oh!

Assignees

Labels

Projects

Milestone

Development

Uh oh!

0 participants

Conversation

dependabot Bot commented on behalf of github Oct 23, 2026

26.2 (2026-07-29)

Deprecations and Removals

Features

2.15.0

2.14.0

v2.15.0 <https://github.com/jpadilla/pyjwt/compare/2.14.0...2.15.0>__

2.8.0

🚀 urllib3 is fundraising for HTTP/2 support

Security

Deprecations & Removals

Features

Bugfixes

2.8.0 (2026-09-15)

Security

Deprecations & Removals

Features

Bugfixes

21.14.9

Bugfixes - 21.14.9

Bugfixes - 21.14.9

Uh oh!

dependabot Bot commented on behalf of github Oct 23, 2026

Labels

Uh oh!

This branch has not been deployed

Reviewers

Uh oh!

Assignees

Labels

Projects

Milestone

Development

Uh oh!

0 participants

`v2.15.0 <https://github.com/jpadilla/pyjwt/compare/2.14.0...2.15.0>`__